MMS Beeline - how to connect and configure - 4.1 out of 5 based on 46 votes
This type of message is no longer used as often as before, because at one time it was an advanced technology that made it possible to send not just a text message, but messages with multimedia. Now this function is not used so often, but it is still used by a fairly large number of people. This material will discuss how to use this service on your phone.
If you have never used this option on your phone, then there is nothing difficult about it. It is very similar to the Beeline SMS option, only in the first case the user can write only text, and when using MMS you have the opportunity to add images, photographs and short audio recordings to this text. All this will be available from your mobile phone, as long as you have an Internet connection, so keep in mind that this service uses Internet traffic to send these types of messages.
How to connect MMS on your phone
If you need to send messages from your mobile phone, then you first need to pay attention to whether your phone supports this service. You can check this in the instructions for your phone or find a description of it on the manufacturer’s official website.
Text-decoration:="" underline="">moskva.beeline.ru/customers/help/mobile/mobilnyy-internet/nastroika-telefona/ or dial the phone number 0604 32 . After this, it is enough to restart your phone by simply turning it off and on again.
How to send MMS from your phone
After connecting to the service and receiving the settings, you can proceed to sending messages. To do this, you need to follow these steps on your phone or smartphone:
- Go to phone menu
- Select the item " Messages»
- Choose " New MMS"maybe create an MMS
- Write text and add attachments
- Specify the recipient's number
- send a message
As for the size of the message, it should not exceed 500 KB, and if there is text, it cannot exceed 1000 characters. You can send this type of message to the numbers of all Russian operators; in addition to mobile operators, you can also send it by email. If necessary, one MMS can be sent to several subscribers at once; to do this, their numbers should be listed separated by commas.
I can't send MMS
If for some reason you are unable to send a multimedia message from your phone, then you should follow a number of steps to find out the cause of the problem. So, for this you need:
- Check the connection to the network and the presence of a GPRS signal (the network and GPRS signal indicator is displayed at the top of the mobile phone display)
- Check whether the number of the subscriber to whom the delivery is being sent is indicated correctly.
- It is also worth checking that the specified settings are correct for your phone model
- If all else fails, then you should contact the nearest communication center moskva.beeline.ru/customers/beeline-on-map/
The message may not be delivered because the user’s phone was turned off or the SIM card was faulty.
How to view a received message on the website
If you receive a message like mms.beeline.ru/, then you received it because the service is not configured on your phone, or for some other reason you were unable to receive it on your phone. In this case, you will be sent a link where you can view this message on the Internet.
It is quite easy for the user to do this; you need to enter this data in the browser in the address bar of the site and you will be able to view your MMS. It is worth noting that this kind of message will not be stored for long; there is a certain storage time, that is, this link will only work for three days. After which the information will be automatically deleted from the company’s server.
MMS has become one of the key mobile messaging services that is responsible for transferring multimedia files. This abbreviation cannot be deciphered in the Russian version, since it is just a tracing paper of the English version: MMS – Multimedia Messaging Service. The size of such a message, into which you can insert an image, animation, or audio track, does not exceed one megabyte in the Beeline network and 500 KB for sending to users of other operators. Otherwise, several mms are sent. In addition, you can send text up to a thousand characters using mms.
Cost of use
- Beeline clients can start using the mms exchange service completely free of charge. The cost of an outgoing message depends on the specific tariff plan and varies from one and a half rubles to 6.6. Thus, the lowest level corresponds to the “Monster of Communication +” tariff (1.5 rubles), the cost of sending one mms at First Children’s is 3.95. For all users of other plans from the Beeline operator, the current price is 6.6 rubles.
- There are no subscription fees, meaning the service is generally free.
As part of using tariff plans from Beeline, you can send multimedia messages to clients of all operators in the Russian Federation, as well as abroad. At the same time, the cost does not exceed the national one. - You can receive MMS within the Beeline network completely free of charge.
How to activate the service: setup steps
In order for the connection to be successful and ultimately, in a certain situation, the user can send the appropriate photo or melody in a timely manner, several points must be observed:
- You need to find out whether receiving and sending mms is supported in a particular device. For owners of modern smartphones, this point is redundant, but those who have older generation phones need to pay attention to it. You can check the availability of the function on the device packaging. If it is not there, you need to find the corresponding item directly in the phone in the “Settings” section.
- You need to activate the “Package of three services” from Beeline, which includes the ability to use not only mms, but also mobile GPRS. To do this, directly from the gadget you need to dial the command: *110*181#.
- Next, you need to make the necessary settings in the device. This can be done not only on the official website of the Beeline company, but also by calling 0604 32. If you choose the latter option, you will need to go to the “Settings” section during the call. If you prefer setting up through the Beeline website, you will be asked to select the brand of the gadget, then a specific model. After that, settings are provided for each individual device, which must be registered manually.
- When all the basic steps have been completed, you need to restart your phone. It’s very easy to check that the settings are correct – you just need to send your first mms.
MMS– a special type of telephone message that allows you to send and receive attached media files (photos, animated pictures, music and short videos). This type of file transfer from phone to phone still remains popular, given that in many regions of Russia a stable Internet connection has not been established. Below we will talk about how to set up MMS for users of the Beeline mobile operator.
By default, each operator enables its users to send MMS. If you have previously disabled this option, you can connect it to Beeline completely free of charge using the following USSD command:
Beeline MMS connection
1. Receive automatic settings.
The most affordable way to connect MMS on Beeline is to send a request to receive automatic settings. To do this, call the toll-free number from your phone 0604 32 . You will then receive settings that you need to accept. After this, the phone will be ready to send and receive MMS messages.
2. Manual setup of MMS.
If for some reason you were unable to receive, this procedure can be carried out manually.
To do this, go to your phone's settings and find the section "Connection profile" (name may vary). Create a new profile with the name "Beeline MMS" and give it the following parameters.
Setting up MMS on Android may be required in two cases. The first of them is buying a new smartphone. The second is to reset existing settings to factory settings. In any case, you need to change the configuration so that this service works. This can be done in four ways:
- Automatically.
- With the help of a service center operator.
- By manually entering the required values.
- Using the operator's regional website.
It is all these methods that will be discussed in detail within the framework of this material.
Automatic setup
Automatic setup of MMS on Android occurs with minimal human intervention - this is its main advantage. But the disadvantage is that it can only be done once - during the initial registration of the device in the mobile operator’s network. After this, everything is considered to be set up and there is no need to resend this data. Its order is as follows:
- We install the SIM card into the corresponding slot of the smartphone and assemble it.
- Turn on the device and, if necessary, enter the PIN code.
- As soon as registration is completed, the search for the required values in the operator’s database begins. After they are found, this information is sent to the gadget.
- Next, the subscriber must accept the configuration profile and save it.
This completes the automatic configuration process. But the process of receiving and sending messages itself may be blocked. The activation procedure will be described further in the text.
Operator assistance
Unlike automatic, setting up MMS on Android with the help of a service center operator or by manual entry can be done many times - this is their plus. But on the other hand, in the process of their implementation you need to perform certain manipulations, which slightly complicates the configuration process. Each operator has a toll-free consultation number. For Beeline it is 0611, for MTS - 0890, for Megafon - 0550. Next, following the instructions from the autoinformer, you need to establish a connection with the operator and order the necessary settings, which will then be sent to your smartphone. Then they need to be accepted and saved. After this operation, it is recommended to completely reboot the device, that is, turn it off and on. In some cases, you may need to activate the service. To do this, when calling the operator, please enable this service for this number. This completes the setup of MMS on Android with the help of a service center operator.
Manual input
It is not always possible to reach the service center, but you need to receive an MMS urgently. In this case, the necessary settings can be set manually. To do this, go to the following address: "Applications"\"Settings"\"Networks"\"More"\"Mobile networks"\"APN". Then you need to enter the operator parameters - this is the actual manual setup of MMS on Android. Beeline, for example, requires the following parameters:
- The profile name should be Beeline MMS.
- The home page in this case is http://mms/.
- Data transmission channel - GPRS.
- Access point - mms.beeline.ru.
- IP address - 192.168.094.023.
- and the password are the same - beeline.
The remaining values remain unchanged. For MTS you need to enter the following data:
- Profile name - MTS MMS center.
- APN should be mms.mts.ru.
- The login and password in this case are identical - mts.
- Home page - http://mmsc.
- IP address - 192.168.192.192.
- Port - 8080 (some models may use 9201).
As in the previous case, we leave all other values unchanged. Setting up MMS Megafon on Android requires the following values:
- Profile name - megafon.
- APN depends on the tariff plan. Here you need to look at the documentation that came with the starter package.
- The login and password in this case are identical - gdata.
- Home page - http://mmsc:8002.
- IP address - 10.10.10.10.
- Port - 8080 (some models may use 9201).
We don’t touch everything else and leave it as is.
Another way...
Another way to obtain settings is to order them on the operator’s regional website. To do this, on a computer connected to the Internet, use a search engine to find the page we need. Then select the smartphone model and enter the captcha and mobile number. Then click “Submit”. Within 5 minutes the necessary information will be received. We save and install the necessary profiles. If the requested information has not been received within 5 minutes, it is better to repeat the order on the same regional website of the mobile operator. It is also recommended to completely reboot the phone. After that, we send and receive MMS. There shouldn't be any problems. If something doesn't work, we look for the error. As practice shows, somewhere they did something wrong. You can delete the old profile and do everything again.
Results
This article described step by step what is on Android for various operators. As can be seen from everything previously said, there is nothing complicated about this. The lucky owner of a new smartphone can handle this task without any problems. Just follow all the directions and you shouldn't have any problems with this procedure.
Since Internet services have become more accessible, the popularity of MMS messages has decreased significantly. But still, sometimes this method is the only opportunity to send a multimedia file to your interlocutor. You can send almost any type of file, but their size cannot exceed one megabyte. In this article we will look at all aspects of this service, its cost, connection and management methods.
MMS is a special service designed for sending and receiving multimedia files and text messages. In this case, you can send it not only to the subscriber’s phone, but also to his email account.
There is a strict limit on file size and it is equal to 1 megabyte, and for accompanying text it is 1000 characters. After receiving such a message, you have 3 days to accept it; after this period, the MMS will be deleted from the server.
For the service to work correctly, you need to obtain special settings and install them on your phone. In addition, the device must support the MMS function. All new models, of course, can do this, but owners of older ones need to familiarize themselves with the characteristics of their phone on the Internet or the instructions.
Important! If the device cannot receive and display an MMS message, then a standard SMS will be sent instead, containing a link. Then, through a computer, you can open it and get the file.
There are no restrictions on territorial parameters; you can send an MMS to any corner of Russia, to another country, or while roaming. Only the prices and, in some cases, the maximum item size will change.
How to activate the service
By default, the option should be activated immediately after connecting the tariff. You can check this by calling the hotline, or through
Personal account, where in the services section there is a separate column displaying status.
If the option is disabled for some reason, then there are 3 ways to activate it:
- Using USSD command. Dial *110*181# on your phone and press the call key. After this, a package of three services will be activated, which includes MMS functionality.
- Through your personal account. We go to the official website of the operator (by connection region) and in the upper left corner we find the “Personal Account” item. If your profile is not there yet, you need to register. This is done quickly, just dial the command *110*9# on your device. Afterwards you will receive a password and login via SMS, use them for authorization and log into your profile. There we find the “Services” tab and select “Available”, look for the MMS connection point and activate it. An analogue to this method is the “My Beeline” mobile application, which includes all the functions of your personal account.
- In the Beeline office. You can find the address of the nearest branch on the official website. They will advise and provide assistance in connecting completely free of charge.
Activation of MMS on Beeline is not limited to one connection to the service. You also need to configure the phone itself; this can be done either using automatic settings or manually.
The automatic method consists of the following steps:
- We find the “MMS Settings” section on the Beeline website. To do this faster, you can use the search on the main page (top of the screen).
- Then you need to indicate the model of your device. You can find it on the label under the battery or on the packaging/documents. If the device is based on Android, then this information will be in the settings, section “About the device”.
- Having chosen, click on the “MMS” button, agree and proceed directly to the settings.
- If the phone supports this function, then on the next page there will be a field for the mobile number. Enter it and click on the “Submit” button.
Important! If automatic setup is not available for your device, you can use manual setup. In this case, you need to follow the instructions and enter all the parameters yourself.
Input options may vary depending on the device type and model. You can find MMS settings on the Beeline website.
Management Rules
After the MMS service is activated and all parameters are adjusted, you can use its functions. In order to transfer a file, find the “Send MMS” item in your phone. Most phones have a function for auto-detecting the type of message, so you just attach an element and write the text, and the system itself will send it like an MMS. To ensure the successful completion of the operation, you can set notifications about the result in the settings.
Until recently, it was possible to send MMS via the Internet, from the Beeline website. However, Beeline has now disabled this option. So now, to use the service via a computer, only third-party services are available. It is better to choose verified ones from among them, otherwise the phone number may end up in the spam database.
If you receive an MMS with unconfigured parameters, an SMS will be sent instead; using the link located inside, you can receive the file. So, for convenience, it is advisable that both subscribers have the correct configuration installed, then they can view the content directly from the phone.
Disconnection methods
This service does not require a subscription fee and, in principle, does not interfere with anything, however, if necessary, it can also be deactivated. As with activation, there are several ways to disable:
- Using your Personal Account. The functionality of this site allows you to manage all your options and connect new ones. All in the same services section, you can also disable unnecessary elements.
- Through the “My Beeline” mobile application. The sequence of actions here is the same as in the previous paragraph, since this is a mobile version of the Personal Account.
Price
There is no subscription fee here, both on the prepaid and postpaid payment systems. Connecting and receiving MMS settings from Beeline is also free.
The standard cost of one MMS message, on most tariffs, is 6.5 rubles. However, there are also special offers that significantly reduce this figure. For example, “First Children's” with 3.95 rubles, or “Monster of Communication +” where the price of one MMS is 1.5 rubles.
You can find a tariff plan with the most suitable prices on the Beeline website. Section “Individuals”, category “Tariffs”.
Let's sum it up
Despite not being in great demand, the MMS service is still relevant. After all, a situation may arise when the supply of Internet traffic has already been exhausted, and there is simply not enough money on the balance to order a new package of megabytes. Then you can send a photo or a short video by message, however, you need to set up your phone before doing this.
Ordering MMS settings and connecting to the service itself are free and will take a little time. If you can’t set automatic parameters, you can do it manually. All data for this is on the operator’s official website, where you can also order auto-tuning.
If communication with the subscriber through such messages occurs regularly, then it is necessary that he also set parameters for himself, this will make it possible to view the content directly from his device.
